Car Stereo Installation Tips
Installing a car stereo is not all that difficult. Here’s the stuff you’ll need for this little project.
•New Stereo
•Wire Strippers
•Wire Cutters
•Tape
•Screwdrivers
Now let us see how to install a stereo in 4 easy steps.
Step #1: Getting it Ready
First things first. You’re going to need a stereo system which fits in the existing space made for it. Because if it doesn’t this job is going to get a lot tougher. So it is better to get a stereo in a size which fits the space intended for it. The second thing to keep in mind is that when you buy the stereo, tell your dealer which car you have. The dealer might have a wiring harness which suits your car best.
Step #2: Remove the Old System
The second step is to remove the old system. But before you do, make sure you unplug the negative wire from the car battery. Even if the car is off, working with the wires connected to the battery can be very dangerous. Remove the old stereo and unscrew the old panel. Unplug all the car wires attached to the old panel before pulling it out. The wires are usually all attached to one plug which you can simply pull out.
Step #3: Plug The New Thing In
If you did get a wiring harness specific to your car, that is really very good news! The job becomes a lot easier this way. All you have to do is plug the wiring harness into the plug. But if you didn’t then it will make your job a bit tougher.
Firstly you have to connect the positive wire from the speaker to the positive connector on the stereo. The take the negative wire from the speaker and connect it into the negative connector. Then connect the negative wire of the stereo to the bolt where the radio is connected and the positive wires to the stereo.
Step #4: Shove the Thing In
Now that all the wires are connected to all the plugs and shove the panel on. Don’t screw the panel in because if there is a problem, you’ll have to unscrew it all over again. Then slide the stereo in. Simple as it gets. Then connect the negative wire back to the battery and start the car. Once the car starts, put in a CD or a pen drive or whatever MP3 storage device your wonderful new stereo can play. And hope that the music starts playing! And if it does, screw in the panel properly.
Still having trouble? Read on for this article on car stereo troubleshooting.
So this was all about how to install a car stereo. Like I said before, the car audio system is truly a very important part of the car itself and something which no driver can drive without anymore. Hence, it is very important to know how to install a car stereo.
car alarm systems Simple step for installation a car alarm in your car.
Great article, hey I came across this post while searching for new lyrics. Thanks for sharing I’ll tell my friends about this too.
Thanks for your extraordinary job in putting this together! Your blog is much advance then others i have seen writing about this issue. Thank you very much for your help in facilitating me get to grips with this issue .
Hey there, This is a fantastic synopsis, I located your blog checking google for a equivalent theme and found this. I couldnt find too much other tips and facts about this posting, so it was wonderful to find out this one. I am going to probably always be returning to look at some other articles you have written another time.
Thanks for the info…
I actually enjoyed reading this posting.Thanks.
I couldn’t believe all the features. Then to top it all off, it is so easy to use and you have several methods of constructing your article. Use the one that suits you best. I can write great articles in less time than ever before.
Satisfied to look at it and say someting here. Beneficial week!
Ok. I wonder when i will get a good answer?